The specific Galaxy A50 SM-A505FN U9 Firmware Download Package comes with a Stock ROM of Galaxy A50 SM-A505FN U9 Security Patch Level 2023-02-01 (2023-02-01 (February 1, 2023)1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505FN U9“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy A50 SM-A505FN U9 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A50 SM-A505FN U9 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy A50 SM-A505FN U9 finally boots up.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505FN U9 Firmware“.
Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.