Fix Camera Issue After Unlocking Bootloader Samsung Phones

In this guide, we aim to help you resolve the camera Camera issue in Samsung devices, especially following activities like unlocking the bootloader or rooting the device.

Delving into custom development typically necessitates unlocking your device’s bootloader. However, proceed with this step mindfully, considering it is laden with risks such as triggering the Knox and initiating a factory reset.

Despite the awareness of such risks, numerous users choose to proceed after careful consideration, embracing the potential for enhanced device customization. Recently, we’ve spotted an issue that might add another layer of complexity to the bootloader-unlocking process.

Earlier incidences with the Galaxy Fold 3 highlighted a scenario where the camera refused to activate post-bootstrap unlocking. Now, this problem also seems to indicate its presence in the A series.

Many Samsung Galaxy A52/A52 5G/A52S device users have reported their cameras failing to function after unlocking the device’s bootloader. If you are a Samsung device owner facing a similar predicament, this guide should prove helpful. Follow the presented steps to rectify this issue.

Fix the Camera not working in Samsung after the Bootloader Unlock

To fix this problem, you will have to change the configuration of your device’s build. prop file so that it appears as another type of phone—one which does not experience this glitch.

You should root your device, and then use the instructions below to install TWRP recovery.

• Download and transfer MagiskHide Props Config to your device from GitHub/XDA.
• Launch the Magisk app on your device.
• Once you’ve downloaded the module, tap Install from Storage and select the file.

• Let the installation finish, then click Restart.
• Now install the Termux app on your device.
• Once you’ve launched the command line interface, type in this command:

su -c props

• You will be prompted for Superuser permission.
• Grant it. Once you are finished, Magisk Hide will launch the Magisk Props Config within a terminal.
• Type in 2 [Force Basic Key Attestation] and hit enter.

• On this page, you’ll enter your keys and verify that they work.
• Type in d [Yes, pick a value from the device list] and hit Enter.

• Then type 26 [Samsung] in the search field and press Enter. After that, select the desired device from the list and press Enter.
• So let’s go with Galaxy S21 for the guide. Type in 78 and hit Enter.

• You will be asked to confirm the selected value, type y [YES], and hit Enter [if it asks for your Android version then you can select any of your choices].
• Next, you will have to restart the device. Type y [YES] and press Enter.
• Once you’ve booted your device, it will now be identified as Galaxy S21. Also, the camera issue would be rectified.

These were the steps to fix the issue of the camera not working in Samsung after unlocking the bootloader or rooting it. If you have any questions about the aforementioned steps, let us know in the comments. We will get back to you with a solution as soon as possible.