Flashing firmware on the Canvas 5 Lite Special Edition Q463 is risky and best left to experienced users. It’s intended to address software problems or downgrade to an older version. In-depth research on the specific steps and risks for your phone’s model and carrier is essential. Download the firmware only from reputable sources and follow a detailed guide designed for the Micromax Canvas 5 Lite Special Edition Q463 to avoid damaging your phone.
The Micromax Canvas 5 Lite Special Edition Q463, released in 2016, provided a budget-friendly option with a 5-inch, 720 x 1280 pixel display for decent visuals. A 1 GHz quad-core processor with 2GB of RAM handled basic tasks well. Storage was limited to 16GB, but expandable with a microSD card. The rear camera captured 8-megapixel photos, while a 5-megapixel front-facing camera sufficed for selfies and video calls. A 2000mAh battery offered moderate power.
Firmware Info:
- Gapps: Included
- Device Supported: Micromax 5 Lite Special Edition Q463
- Tool Supported: SP Flash Tool
- Soc: MediaTek
- Os: Android
Download:
Requirements:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Backup your data
- Sp flash tool
- MTK Driver
Instructions to Flash Micromax 5 Lite Special Edition Q463 Stock ROM:
- The flash file zip you downloaded earlier can be saved on your computer’s desktop. Besides, get a sp flash tool and extract it.
- Then you can download the USB driver and put it on your computer. If you already have the USB driver installed skip this step.
- Then turn off your smartphone and remove the battery if it is detachable.
- Then go to the sp flash tool extract folder and start the application.
- Click on the download button after opening the Flash tool.
- Select the scatterload option in the download tab.
- Pick the scatter file from the firmware extract folder.
- Flashing starts by clicking the download button.
- Connect your phone to your computer with a USB cable or remove the battery if it is removable and then press the volume up or down button simultaneously.
- Flashing will start shortly and should be done in a few minutes.
The green ring for downloading in the flash tool will be visible after the process is finished. Close the sp flash tool and remove your smartphone. That’s it for now. You’ve successfully loaded stock ROM onto your Micromax 5 Lite Special Edition Q463 device.
