If your Intex Aqua Strong 5.2 phone is corrupt or bricked. Download Intex Aqua Strong 5.2 stock firmware from here. To get it back to a working condition again.
All you have to do is simply download the below-given Intex Aqua Strong 5.2 firmware files and tools on your PC. Then follow the given instructions to install the Stock ROM on Intex Aqua Strong 5.2 using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem.
The Intex Aqua Strong 5.2 is a budget-friendly smartphone that was released in October 2016. It has a 5.0-inch touchscreen display with a resolution of 480 x 854 pixels. The phone is powered by a 1GHz quad-core MediaTek MT6735 processor and 2GB of RAM. It comes with 16GB of internal storage that can be expanded via microSD card (up to 32GB). The Intex Aqua Strong 5.2 has a 5-megapixel rear camera and a 2-megapixel front camera. It runs Android 6.0 Marshmallow and is powered by a 2800mAh non-removable battery.
Firmware Info:
- Gapps: Included
- Device Supported: Intex Aqua Strong 5.2
- Tool Supported: SP Flash Tool
- Soc: MediaTek MT6735M
- Os: Android
Download:
Requirements:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Backup your data
- Sp flash tool
- MTK Driver
Instructions to Flash Intex Aqua Strong 5.2 Stock ROM:
- The flash file zip you downloaded earlier can be saved on your computer’s desktop. Besides, get a sp flash tool and extract it.
- Then you can download the USB driver and put it on your computer. If you already have the USB driver installed skip this step.
- Then turn off your smartphone and remove the battery if it is detachable.
- Then go to the sp flash tool extract folder and start the application.
- Click on the download button after opening the Flash tool.
- Select the scatterload option in the download tab.
- Pick the scatter file from the firmware extract folder.
- Flashing starts by clicking the download button.
- Connect your phone to your computer with a USB cable or remove the battery if it is removable and then press the volume up or down button simultaneously.
- Flashing will start shortly and should be done in a few minutes.
The green ring for downloading in the flash tool will be visible after the process is finished. Close the sp flash tool and remove your smartphone. That’s it for now. You’ve successfully loaded stock ROM onto your Intex Aqua Strong 5.2 device.
