Galaxy A14 SM-A145M/DS U4 Firmware – Android 14
If you own a Galaxy A14 SM-A145M/DS smartphone and want to upgrade your device’s U4 firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A14 SM-A145M/DS U4 With 2024-01-01 (January 1, 2024) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A14 SM-A145M/DS Binary 4 Android 14 Brazil ZTO A145MUBS4BXA1
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy A14 SM-A145M/DS U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy A14 SM-A145M/DS U4
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A14 SM-A145M/DS U4 Stock Firmware:
Download Galaxy A14 SM-A145M/DS U4 Latest Firmware:
SM-A145M/DS U4 Brazil ZTO A145MUBS4BXA1:
Model / Device | SM-A145M Binary 4 U4, S4, Bit 4 |
Region / Country | Brazil |
Language | Multi-Language |
Android Version | Android 14 |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
AP/PDA | A145MUBS4BXA1 |
CSC | A145MOWO4BWL2 |
Modem CP Version / Baseband | A145MUBU4BWK8 |
Product code | ZTO |
Model References | SM-A145MLGNZTO, SM-A145MZSRZTO, SM-A145MLGGZTO, SM-A145MZSGZTO, SM-A145MZKGZTO |
Build / Release Date | 2024-02-06 |
Security Patch Level | 2024-01-01 (January 1, 2024) |
Size | 5.1GB |
Download | Google Drive |
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A14 SM-A145M/DS U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A14 SM-A145M/DS U4 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy A14 SM-A145M/DS U4 can improve your device, including bug fixes and new features. If you follow the steps outlined in this guide, you can successfully update your device to the latest firmware version. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features