Mlled This specific Mlled R9 Firmware Download Package comes with a Stock ROM of Mlled R9. USB drivers, Flash tool for Installing the firmware and a brief guide. To help you in installing the Mlled R9 Stock Firmware. Mlled R9 Firmware is a set of programs and software installed on the ROM.
it also is known as Mlled R9 Flash File and Mlled R9 Stock ROM. That firmware update is only for Mlled R9. Don’t try to install that firmware on other models of MTK Android devices that can destroy your phone.
This article contains the Mlled R9 Firmware Flash File. That will allow you to recover your Mlled R9 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
Mlled R9 Firmware Flash File [Stock ROM]:
We will use Sp Flash Tool to unbrick the Mlled R9 as we use for Mlled m3c. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Mlled R9.
[quads id=2]The Advantages Mlled R9 Firmware:
- Flash Stock To Unbrick your Mlled R9
- Fix boot loop issue
- Update and Downgrade Mlled R9
- Unroot or Fix Bugs
- To solve the lag or stutter on Mlled R9
- Fix software issues.
- Return to stock for warranty coverage.
Mlled R9 Firmware Details:
- Gapps File: Included
- Device Supported: Mlled R9
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6580
- Os: Android 6.0 Marshmallow
Download
[quads id=2]
Pre-requirements to Install Mlled R9 Firmware:
- Supported Phone: Mlled R9
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
Mlled R9 Flashing Tool And Drivers:
- Mlled R9 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- Mlled R9 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please Read and understand the Full Guide Before Flashing Mlled R9 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install Mlled R9 Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download Mlled R9 Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in the SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction Mlled R9 Firmware Flashing With Sp Flash Tool.
