At some point, while using Mlled M3C, you’ll probably encounter a situation in which you need to flash Mlled M3C firmware. You might need a Mlled M3C stock ROM how do you make sure the flashing process goes off without a hitch?

That’s what we’re going to tell you in this post! To do it, we’ll use a free flashing tool called Sp Flash Tool. This tool will enable you to flash stock ROM of your Mlled M3C and set up on a new Firmware.

Mlled M3C Firmware Flash File [Stock ROM]:

We will use the SPD Download Tool to unbrick the Spreadtrum Devices With Stock ROM Flash Files. This tool is really very efficient. Just follow the step by step procedure to use One Click Unbrick Tool and unbrick your SPD Phone.

SPD Download Tool and it is used to Manually Upgrade or flash Spreadtrum Android Smartphone or Tablet. SPD Download Tool is used to flash only Stock Rom or Custom OR Stock Firmware on Spreadtrum Devices. Flash File comes in .zip Format. To use the Spd Factory Update tool Flash Stock ROM first need to properly install the latest Spreadtrum Drivers.

The Benefit Of Mlled M3C Firmware:

• Flash Stock To Unbrick your Mlled M3C
• Fix boot loop issue
• Update and Downgrade Mlled M3C
• Unroot or Fix Bugs
• To solve the lag or stutter on Mlled M3C
• Fix software issues.
• Return to stock for warranty coverage.

Mlled M3C Firmware Details:

• Gapps File: Included
• Device Supported: Mlled M3C
• Tool Supported: SPD Flash Tool
• Processor: SPD SC8825

Download

• Mlled_M3C_SC8825_20140121_4.0.3_SPD.zip

Pre-requirements to Install Mlled M3C Firmware:

• Supported Phone: Mlled M3C
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• Backup your Call Log – Contacts – Sms – Etc With G Backup

Mlled M3C Flashing Tool And Drivers:

• Download  SPD Download Tool.zip  –  Spreadtrum Drivers.zip

Disclaimer:

• Please read and understand the Full Guide Before Flashing Mlled M3C Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error When Flashing Mlled M3C Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Mlled M3C Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Advertisements

Instructions to Install Mlled M3C Firmware:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the Mlled M3C Firmware.pac file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.