Galaxy Tab S9+ SM-X810 U1 Firmware – Android 13 T

If you own a Galaxy Tab S9+ SM-X810 U1 smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy Tab S9+ SM-X810 U1 With 2023-08-01 (August 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy Tab S9+ SM-X810 Binary 1 Android 13 Brazil ZTO X810XXU1AWHA

Benefits of Updating Firmware

Updating firmware can be daunting for many companies, but keeping up with the latest technology and ensuring that their systems are running smoothly is essential. Firmware updates provide benefits for businesses, from improved security to enhanced performance. By taking advantage of these advantages, firms can stay competitive in today’s marketplace and better serve their customers.

There are various reasons to flash “Stock Firmware on Galaxy Tab S9+ SM-X810 U1“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs on the Phone
• To solve the lag or stutter
• Fix software issues.
• Revert to stock firmware

Preparation:

• Supported Phone: Galaxy Tab S9+ SM-X810 U1
• Ensure it’s at least 50% charged.
• Laptop or PC.
• Backup Android Phone
• Download and install the Samsung USB Driver
• Download Odin’s Latest version

How To Install Galaxy Tab S9+ SM-X810 U1 Stock Firmware:

Download Galaxy Tab S9+ SM-X810 U1 Latest Firmware:

SM-X810 U1 Brazil ZTO X810XXU1AWHA:

Model	SM-X810 Binary 1 U1, S1, Bit 1
Region / Country	Brazil
Language	Multi-Language
Android Version	Android 13 T
Operator / Operator / Carrier	Clean ZTO (without logo, operator apps)
AP/PDA	X810XXU1AWHA
CSC	X810OXM1AWHA
Modem CP Version / Baseband	X810XXU1AWHA
Product code	ZTO
Model References	SM-X810NZAHZTO, SM-X810NZADZTO
Build / Release Date	2023-10-18
Security Patch Level	2023-08-01 (August 1, 2023)
Size	8.6GB

[quads id=2]

Download

Google Drive

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy Tab S9+ SM-X810 U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the Phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy Tab S9+ SM-X810 U1 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”