Galaxy Tab A7 Lite SM-T225 U1 Firmware – Android 13 T
Galaxy Tab A7 Lite SM-T225 U1 Firmware Started rolling the new latest 2022-11-01 (November 1, 2022) security patch with build number T225XXU1AUE3. the updated Android 11 latest patch device. If you haven’t received the recent update version on your Galaxy Tab A7 Lite SM-T225 smartphone, then you can go manually to check the software update setting.
Samsung Galaxy Tab A7 Lite 4G SM-T225 Binary 1 Android 13 T Brazil ZTO T225XXU1CVL6
There are various reasons to flash “Stock Firmware on Galaxy Tab A7 Lite SM-T225 U1. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy Tab A7 Lite SM-T225 U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Tab A7 Lite SM-T225 U1 Stock ROM Details:
SM-T225 U1 Brazil ZTO T225XXU1CVL6:
Model | SM-T225 Binary 1 U1, S1, Bit 1 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | T225XXU1CVL6 |
CSC | T225OWO1CVL6 |
Modem CP Version / Baseband | T225XXU1CVL5 |
product code | ZTO |
Build Date | 2022-12-21 |
Security Patch Level | 2022-11-01 (November 1, 2022) |
Size | 3.7 GB |
Download | Mega | Google Drive |
Optional Download Boot.img Galaxy Tab A7 Lite
boot.img.lz4 Tab A7 Lite SM-T225 T225XXU1BVGB to root Magisk without TWR
Other Firmware Fir Galaxy Tab A7 Lite:
How To Install Galaxy Tab A7 Lite SM-T225 U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy Tab A7 Lite SM-T225 U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is done, a Green Box with “Pass” will appear in Odin. The Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy Tab A7 Lite SM-T225 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Tab A7 Lite SM-T225 U1 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features