Samsung

Galaxy A10s SM-A107M/DS Binary 6 Firmware – Android 11 R

SM-A107M/DS Binary 6 Firmware

The specific Galaxy A10s SM-A107M/DS U6 Firmware Download Package comes with a Stock ROM of Galaxy A10s SM-A107M/DS U6 Security Patch Level 2022-11-01 (November 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A10s SM-A107M/DS Binary 6 Android 11 R Brazil Vivo ZVV A107MUBS6CVL3

There are various reasons to flash “Stock Firmware on Galaxy A10s SM-A107M/DS U6“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy A10s SM-A107M/DS U6 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy A10s SM-A107M/DS U6 Stock ROM Details:

SM-A107M/DS Binary 6 Android 11 R Brazil Vivo ZVV A107MUBS6CVL3:

ModelSM-A107M/DS Binary 6 U6, S6, Bit 6
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierLive ZVV
AP / PDAA107MUBS6CVL3
CSCA107MOWT6CVL1
Modem CP Version / BasebandA107MUBU6CVG3
product codeZVV
Build Date2022-12-14
Security Patch Level / Security2022-11-01 (November 1, 2022)
Size3.1 GB
[quads id=2]
Brazil Live ZVVMegaGoogle Drive
Brazil Tim ZTMMega
Google Drive
SM-A107M/DS Binary 6 Android 11 R Brazil ZTO A107MUBU6CVJ3:
ModelSM-A107M/DS Binary 6 U6, S6, Bit 6
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierClean ZTO (no logo, carrier apps)
AP / PDAA107MUBU6CVJ3
CSCA107MOWO6CVJ3
Modem CP Version / BasebandA107MUBU6CVJ3
product codeZTO
Build Date2022-11-01
Security Patch Level2022-07-01 (July 1, 2022)
Size3.1GB
[quads id=2]
DownloadMegaGoogle Drive

How To Install Galaxy A10s SM-A107M/DS U6 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A10s SM-A107M/DS U6 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy A10s SM-A107M/DS U6 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy A10s SM-A107M/DS U6 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button