Galaxy J6 Plus SM-J610G U7 Firmware – Android 10 Q

SM-J610G Binary 7 Firmware - Android 10 Q

The specific Galaxy J6 Plus SM-J610G U7 Firmware Download Package comes with a Stock ROM of Galaxy J6 Plus SM-J610G U7 Security Patch Level 2022-06-01 (June 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy J6+ SM-J610G Binary 7 Android 10 Q Mexico TCE J610GUBS7CVL4

There are various reasons to flash “Stock Firmware on Galaxy J6 Plus SM-J610G U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy J6 Plus SM-J610G U7 Stock ROM Details:

SM-J610G U7 Mexico TCE J610GUBS7CVL4:

Model SM-J610G Binary 7 U7, S7, Bit 7
Region / Country Mexico
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Mexico Telcel TCE
AP / PDA J610GUBS7CVL4
CSC J610GOWA7CVK2
Modem CP Version / Baseband J610GUBS7CVL3
product code TEC
Build Date 2022-12-07
Security Patch Level 2022-06-01 (June 1, 2022)
Size 2.7 GB
[quads id=2]
Download Mega Google Drive
SM-J610G U7 Panama TPA J610GUBS7CVJ9:
Model SM-J610G Binary 7 U7, S7, Bit 7
Region / Country Panama
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Clear TPA (no logo, carrier apps)
AP / PDA J610GUBS7CVJ9
CSC J610GOWO7CVJ1
Modem CP Version / Baseband J610GUBS7CVJ1
product code TPA
Build Date 2022-10-21
Security Patch Level 2022-06-01 (June 1, 2022)
Size 2.6 GB
Panama – TPA Mega Google Drive
Argentina – ARO Mega Google Drive

Must Read:

How To Install Galaxy J6 Plus SM-J610G U7 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If the Samsung USB Driver is already installed on your computer, Skip this Step.

2: Download and extract the  Galaxy J6 Plus SM-J610G U7 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy J6 Plus SM-J610G U7 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy J6 Plus SM-J610G U7 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

About Asim

Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!

Leave a Reply

Your email address will not be published. Required fields are marked *