Galaxy A03 Core SM-A032F U4 Firmware – Android 13 T

If you own a Galaxy A03 Core SM-A032F smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A03 Core SM-A032F U4 With 2023-09-01 (September 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A03 Core SM-A032F Binary 4 Android 13 Russia SER A032FXXU4CWI8

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A03 Core SM-A032F U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs
• To solve the lag or stutter
• Fix software issues.
• Revert to stock firmware

Preparation:

• Supported Phone: Galaxy A03 Core SM-A032F U4
• Ensure it’s at least 50% charged.
• Laptop or PC.
• Backup Android Phone
• Download and install the Samsung USB Driver
• Download Odin’s Latest version

How To Install Galaxy A03 Core SM-A032F U4 Stock Firmware:

Download Galaxy A03 Core SM-A032F U4 Latest Firmware:

Model	SM-A032F Binary 4 U4, S4, Bit 4
Region / Country	Russia
Language	Multi-Language
Android Version	Android 13 T – Android GO edition
Operator / Operator / Carrier	Clean SER (without logo, operator apps)
AP/PDA	A032FXXU4CWI8
CSC	A032FOXM4CWI8
Modem CP Version / Baseband	A032FXXU4CWI8
Product code	TO BE
Build / Release Date	2023-09-27
Security Patch Level	2023-09-01 (September 1, 2023)
Size	2GB

[quads id=2]

Download

Google Drive

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A03 Core SM-A032F U4 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy A03 Core SM-A032F U4 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”