Ulefone Power Armor 14 Pro Firmware

Download Firmware / Flash File For Ulefone Power Armor 14 Pro:

Ulefone Power Armor 14 Pro Firmware: If your Ulefone Power Armor 14 Pro phone is corrupt or bricked. Download Ulefone Power Armor 14 Pro stock firmware from here. To get it back to working condition again. 


All you have to do is simply download the below-given Ulefone Power Armor 14 Pro firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Ulefone Power Armor 14 Pro using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

There are various reasons to flash (Firmware on Ulefone Power Armor 14 Pro). 

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader
  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  •  Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Ulefone Power Armor 14 Pro Flash Tool And Drivers:
  • A.  Download and install Ulefone Power Armor 14 Pro Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Sp flash tool as Ulefone Power Armor 14 Pro Flash Tool because this tool is very efficient and support all kind of MTK phones.

Firmware Information:

Device Name Ulefone Power Armor 14 Pro
ROM Type Full ROM
SoC Mediatek
OS Android 12 S
Password Null
Gapps Included
Root Access No
Region GLO
Firmware Version 20220415_V01
[quads id=2]
Download Links: GQ3097TH1_KSE3H_Ulefone_20220415_V01 EEA + GLO
Instructions to Flash Ulefone Power Armor 14 Pro Stock ROM:

1. First of all Download the ‘Ulefone Power Armor 14 Pro Firmware flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launched, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

  • That’s it. Now you’ve successfully flashed stock ROM on your Ulefone Power Armor 14 Pro.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.


  • Please read and understand the Full Guide before flashing “Ulefone Power Armor 14 Pro Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.


Please enter your comment!
Please enter your name here