Blackview Max 1 Firmware Flash File [Stock ROM Download]

If your Blackview Max 1 phone is corrupt or bricked. Download Blackview Max 1 stock firmware from here. To get it back to a working condition again. 

All you have to do is simply download the below-given Blackview Max 1 firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Blackview Max 1 using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

How To Flash Blackview Max 1 Stock ROM:

There are various reasons to flash (Firmware on Blackview Max 1).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

Requirements To Flash Blackview Max 1 Stock ROM:

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

Instructions to Flash Blackview Max 1 Stock ROM:

1. First of all Download the ‘Blackview Max 1 A809_DK002_63_O1_V2.3.1.4_S190225 flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launch, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Blackview Max 1 Firmware Details:

[quads id=2]