This specific Walton Primo G8 Firmware Flash File Which helps you to bypass or unlock FRP lock and revert form root and custom ROM. If your Walton Primo G8 Stuck on startup logo. Then its time to flash Walton Primo G8 Stock ROM.
Why would you want to flash Firmware on your Walton Primo G8?
There are various reasons to flash Firmware on Oukitel K9. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.
[quads id=2]The Benefit Of Walton Primo G8 Firmware:
- Flash Stock ROM To Unbrick
- Unlock Frp Lock From Walton Primo G8
- Unroot or fix bugs on the phone
- To solve the lag or stutter
- Fix software issues.
- Revert to stock to get your warranty
- Keeps rebooting issue
- if your phone boots straight into recovery
- Phone boots straight into its bootloader
Walton Primo G8 Firmware Details:
- Gapps File: Included
- Device Supported: Walton Primo G8
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6580
- OS: Android
Download Walton Primo G8 Flash File:
[quads id=2]Requirements to flash Walton Primo G8 Stock ROM:
- Supported Phone: Walton Primo G8 Stock ROM
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
1. Take Walton Primo G8 Firmware Backup
Before going to install Walton Primo G8 stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.
How To Backup Android Phone Before Flashing Stock Firmware
2. Download Walton Primo G8 Flash Tool And Drivers:
A. Download and install Walton Primo G8 Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the Sp flash tool for as Walton Primo G8 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Walton Primo G8.
I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Walton Primo G8.
Instructions to Flash Walton Primo G8 Stock ROM:
1. Download Walton Primo G8 flash file zip file is given above and extracts it on your computer.
2. Download Walton Primo G8 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.
3. Next, switch off your Walton Primo G8 smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.
5. As soon as the SP Flash tool is launch, click on on “Download” tab.
![How To Flash Walton Primo G8 Firmware File [ROM] 1](https://aiomobilestuff.com/wp-content/uploads/2019/03/3-2-1024x635.jpg "How To Flash Walton Primo G8 Firmware File [ROM] 1")
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on “Open Scatter File” and choose the scatter file from Step 1. For reference, see the picture given below.
8. Now click on on the “Download” button to start the flashing process.
9. Next, join your Walton Primo G8 Android device to your computer using the USB cable (without battery – whether it is battery removable) and press volume up or volume down button.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.
As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut the SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed stock ROM firmware in your Walton Primo G8 Android device.
Follow Detailed Instruction Walton Primo G8 Firmware Flashing With Sp Flash Tool.
Disclaimer:
- Please read and understand the Full Guide Before Flashing Walton Primo G8 Firmware.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Before flashing, Stock ROM Walton Primo G8 must have a 70–80% charge.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!
Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
