How To Flash Lenovo A Plus A1010a20 Firmware File

Lenovo A Plus A1010a20 Firmware

in this article, you will learn how you can flash Lenovo A Plus A1010a20 Firmware file. So if you are in this article, then either your phone is working properly. You can also use this guide as A1010a20 Da boot flash.

if you do not like the custom ROMs you have installed and want to go back to the original operating system

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Lenovo A Plus A1010a20 Stock ROM, USB drivers and flash tool that is in it.

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Lenovo A Plus A1010a20 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Lenovo A Plus A1010a20 Firmware.

3. And in the last part, we will guide you How to flash this Lenovo A Plus A1010a20 ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

 

The Advantages Of Lenovo A Plus A1010a20 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Lenovo A Plus A1010a20 is stuck in a boot loop, and as the name implies, it is caused by a software error on Lenovo A Plus A1010a20.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Lenovo A Plus A1010a20 through recovery or with SP Flash Tool.

If your Lenovo A Plus A1010a20 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Lenovo A Plus A1010a20 Stock ROM Details:

Gapps File: Included
Device Supported: Lenovo A Plus A1010a20
Tool Supported: SP Flash Tool
Processor: MediaTek MT6737
Os: Android 7.0 Nougat
Download Lenovo A Plus A1010a20 Flash file Lenovo A Plus A1010a20 MT6737 7.0.zip

Pre-requirements to Install Lenovo A Plus A1010a20 Firmware:

  • Supported Phone: Lenovo A Plus A1010a20
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Lenovo A Plus A1010a20 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Lenovo A Plus A1010a20 Flashing Tool And Drivers:

A.  Download and install Lenovo A Plus A1010a20 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Lenovo A Plus A1010a20.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Lenovo A Plus A1010a20.

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Lenovo A Plus A1010a20 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Lenovo A Plus A1010a20 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Lenovo A Plus A1010a20 Firmware:

1. Download Lenovo A Plus A1010a20 flash file zip file given above and extract it on your computer.

2. Download Lenovo A Plus A1010a20 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Lenovo A Plus A1010a20 smartphone and take away the battery (it’s removable).

Switch Off Lenovo A Plus A1010a20

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Lenovo A Plus A1010a20 Firmware Flash

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

How To Flash Lenovo A Plus A1010a20 Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Lenovo A Plus A1010a20 Firmware

9. Next, join your Lenovo A Plus A1010a20 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Lenovo A Plus A1010a20 Android device.

Follow Detailed Instruction Lenovo A Plus A1010a20 Firmware Flashing With Sp Flash Tool.

Check Also

Positivo Twist 2 Firmware

Positivo Twist 2 Firmware Flash File [Stock ROM Download]

If your Positivo Twist 2 phone is corrupt or bricked. Download Positivo Twist 2 stock …

Leave a Reply

Your email address will not be published. Required fields are marked *