Galaxy Tab A8 SM-X200 U1 Firmware – Android 13 T
The specific Galaxy Tab A8 SM-X200 U1 Firmware Download Package comes with a Stock ROM of Galaxy Tab A8 SM-X200 U1 October 2022 Security Update. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Tab A8 Wi-Fi SM-X200 Binary 1 Android 13 T Brazil ZTO X200XXS1CWA3
There are various reasons to flash “Stock Firmware on Galaxy Tab A8 SM-X200 U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy Tab A8 SM-X200 U1
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Tab A8 SM-X200 U1 Stock ROM Details:
SM-X200 U1 Brazil ZTO X200XXS1CWA3:
Model | SM-X200 Binary 1 U1, S1, Bit 1 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | X200XXS1CWA3 |
CSC | X200OWO1CVL5 |
Modem CP Version / Baseband | X200XXS1CWA3 |
product code | ZTO |
Build Date | 2023-01-13 |
Security Patch Level | 2023-01-01 (January 1, 2023) |
Size | 3.9GB |
Download | Google Drive |
How To Install Galaxy Tab A8 SM-X200 U1 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Tab A8 SM-X200 U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy Tab A8 SM-X200 U1 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Tab A8 SM-X200 U1 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- 10 Ways to Bypass Forgotten Account on Samsung [ByPass FRP]