Home Stock Firmware Galaxy S21 5G SM-G9910 U1 Firmware – G9910ZHU1AUA4

Galaxy S21 5G SM-G9910 U1 Firmware – G9910ZHU1AUA4

Galaxy S21 5G SM-G9910 Binary 1 Firmware

The specific Galaxy S21 5G SM-G9910 U1 Firmware Download Package has a Stock ROM of Galaxy S21 5G SM-G9910 U1. This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy S21 5G SM-G9910 U1 Fill Firmware

There are various reasons to flash “Stock Firmware on Galaxy S21 5G SM-G9910 U1“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Prerequisites:

Galaxy S21 5G SM-G9910 U1 Stock ROM Details:

Model: SM-G9910 Binary 1, U1, S1, Bit 1
Language: Multi-Language
Android version: Android 11 R
Operator / Carrier: Clean (without logo, operator apps)
PDA: G9910ZHU1AUA4
CSC: G9910OZS1AUA4
Size: 6.1 GB
Advertisements
One Drive Google Drive GD2

How To Install Galaxy S21 5G SM-G9910 U1 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy S21 5G SM-G9910 U1 Firmware[/highlight] files on your computer.

Advertisements

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the smartphone to the computer, Odin will automatically recognize the device and show the “Added” message in the lower left panel.

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

Advertisements

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

You should run your desired firmware when your Galaxy S21 5G SM-G9910 U1 finally boots up.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy S21 5G SM-G9910 U1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Previous articleGalaxy M31s SM-M317 U2 Combination File – M317FXXU2ATI2
Next articleGalaxy S21 5G SM-G991B U1 Firmware – G991BXXU1AUA4
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!