Galaxy A52 SM-A525M Binary 3 Firmware

The specific Galaxy A52 SM-A525M U3 Firmware Download Package has a Stock ROM of Galaxy A52 SM-A525M U3 Security Patch Level 2021-08-01 (August 1, 2021). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A52 SM-A525M Binary 3 Android 11 R Brazil ZTO – A525MUBU3AUG4

There are various reasons to flash “Stock Firmware on Galaxy A52 SM-A525M U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A52 SM-A525M U3 Stock ROM Details:

SM-A525M U3 Brazil ZTO – A525MUBU3AUG4:

- Advertisement -
Model SM-A525M Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean ZTO (no logo, carrier apps)
PDA A525MUBU3AUG4
CSC A525MOWO3AUG5
product code ZTO
Build Date 28 Jul 2021
Security Patch Level 2021-08-01 (August 1, 2021)
Size 5.9 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A52 SM-A525M U3 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract the Galaxy A52 SM-A525M U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

You should run your desired firmware when your Galaxy A52 SM-A525M U3 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A52 SM-A525M U3 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.