Galaxy A32 SM-A325M/DS U3 Firmware - Android 13 T

Galaxy A32 SM-A325M/DS U3 Firmware – Android 13 T

by Asim · Published Monday, Apr 03 2023 10:01PM · Updated Wednesday, Mar 20 2024 6:08AM

Galaxy A32 SM-A325M/DS Binary 3 Firmware

If you own a Galaxy A32 SM-A325M/DS U3 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A32 SM-A325M/DS U3 With 22023-03-01 (March 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A32 SM-A325M/DS Binary 3 Android 13 Brazil ZTO A325MUBU3DWC1

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A32 SM-A325M/DS U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

Fix boot loop issue
Update and Downgrade
Unroot or Fix Bugs
To solve the lag or stutter
Fix software issues.
Revert to stock firmware

Preparation:

Supported Phone: Galaxy A32 SM-A325M/DS U3
Charge your mobile: You may no less than a half charge.
Laptop or PC.
Backup Android Phone
Download and install the Samsung USB Driver
Download Odin’s Latest version

How To Install Galaxy A32 SM-A325M/DS U3 Stock Firmware:

Download Galaxy A32 SM-A325M/DS U3 Latest Firmware:

SM-A325M/DS U3 Brazil ZTO A325MUBU3DWC1:

Advertisements

Model	SM-A325M/DS Binary 3 U3, S3, Bit 3
Region / Country	Brazil
Language	Multi-Language
Android version	Android 13 T
Operator / Carrier	Clean ZTO (no logo, carrier apps)
AP / PDA	A325MUBU3DWC1
CSC	A325MOWO3DWC1
Modem CP Version / Baseband	A325MUBU3DWC1
product code	ZTO
Model References	SM-A325MLVKZTO, SM-A325MZBKZTO, SM-A325MZKKLEB, SM-A325MZKRLEB
Build Date	2023-03-07
Security Patch Level	2023-03-01 (March 1, 2023)
Size	5.4GB

Brazil ZTO	Google Drive
Brazil Claro ZTA	Google Drive
Brazil Tim ZTM	Google Drive

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the Galaxy A32 SM-A325M/DS U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Advertisements

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

Advertisements

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

Advertisements

When your Galaxy A32 SM-A325M/DS U3 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

Restart your device and retry the installation process.
Ensure your device has sufficient battery.
If you continue encountering problems, you may need to perform a factory reset on your device. This will erase all of your data, so be sure to back up your data before performing a factory reset.

Conclusion

Installing the latest firmware on your Galaxy A32 SM-A325M/DS U3 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.

Advertisements

Must Read: