Galaxy A10 SM-A105M/DS U8 Firmware – Android 11 R
The specific Galaxy A10 SM-A105M/DS U8 Firmware Download Package comes with a Stock ROM of Galaxy A10 SM-A105M/DS U8 Security Patch Level 2023-02-01 (February 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A10 Galaxy A10 SM-A105M/DS Binary 8 Android 11 Brazil Claro ZTA A105MUBU8CWB1
There are various reasons to flash “Stock Firmware on Galaxy A10 SM-A105M/DS U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A10 SM-A105M/DS U8
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A10 SM-A105M/DS U8 Stock ROM Details:
SM-A105M/DS U8 Brazil Claro ZTA A105MUBU8CWB1:
Model | SM-A105M/DS Binary 8 U8, S8, Bit 8 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | clear ZTA |
AP / PDA | A105MUBU8CWB1 |
CSC | A105MOWA8CWB1 |
Modem CP Version / Baseband | A105MUBU8CWB1 |
product code | ZTA |
Build Date | 2023-02-28 |
Security Patch Level | 2023-02-01 (February 1, 2023) |
Size | 3.4GB |
Download | Mega | Google Drive |
How To Install Galaxy A10 SM-A105M/DS U8 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A10 SM-A105M/DS U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A10 SM-A105M/DS U8 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A10 SM-A105M/DS U8 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- 10 Ways to Bypass Forgotten Account on Samsung [ByPass FRP]