Realme C53 RMX3760 Firmware Flash File – Android 13 T

AsimMonday, Aug 07 2023 5:49PM

0 5,124 1 minute read

Realme C53 RMX3760 Firmware

Download Firmware/Flash File For Realme C53 RMX3760:

The specific Realme C53 RMX3760 Firmware comes with a Stock ROM of Realme C53 RMX3760. This helps you to bypass the FRP lock and revert from the root and custom ROM.

There are various reasons to flash (Firmware on Realme C53 RMX3760).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Stock Firmware:

Flash Stock ROM to unbrick your Realme C53 RMX3760
Update and downgrade
Unroot or fix bugs on the phone
To solve the lag or stutter
Fix software issues.
Revert to stock to get your warranty
Keeps rebooting issue
If your phone boots straight into recovery
Phone boots straight into its bootloader

Firmware Information:

Device Name:	Realme RMX3760
ROM Type:	Full ROM
SoC:	unisoc
OS:	Android 13
Password:	Null
Root Access:	No
Region:	Check Below List
Firmware Version:	Check Below List

[quads id=2]

OFP Packages:

Requirements:

Charge your mobile: Your phone may no less than a half charge.
Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Realme C53 RMX3760 Full Backup

Before going to install Realme C53 RMX3760 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Realme C53 RMX3760 Flash Tool And Drivers:

A. Download and install Realme C53 RMX3760 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Realme Flash Tool as Realme C53 RMX3760 Flash Tool because this tool is very efficient and support all kind of SPD phones.
You should unlock your Realme Device bootloader before following the tutorial below. Realme Flash Tool will not work on Locked bootloader devices.

Flash or install .ofp Firmware using the Realme Flash Tool:

1 – Extract Realme Flash Tool on the computer (assuming you have already downloaded it; if not then Download Realme Flash Tool). Once you have extracted the tool, you will be able to see the following files:

2 – Open Realme Flash.exe to Launch the tool:

5 – Once the Flash Tool is launched, you will be able to see the following window:

6 – Click on the Browse button:

7 – Locate the .ofp firmware on the computer:

8 – Switch off the Mobile Device > Press and Hold Power and Volume Down keys simultaneously to enter the fast boot mode.

9 – Connect your Device to the Computer using the USB cable:

10 – Click on the Loading button to allow the flash tool to detect the connected device.

11 – Click on the Flash button:

12 – Click on the Confirm button to begin the flashing or installation process:

14 – Once the flashing or installation process is completed, you will be able to see the Flashing Completed message on the tool.

Congratulations! Now, Close the Tool on the computer Disconnect the device and Restart it.

Disclaimer:

Read and understand the Full Guide before flashing.”Realme C53 RMX3760 Firmware”.
Use these instructions at your own risk.
Before flashing, Stock ROM on Realme C53 RMX3760 must have a 70–80% charge.