Energy Phone Max Firmware Flash File [Stock ROM]

This specific Energy Phone Max Firmware Download Package For Energy Phone Max comes with a Stock ROM of Energy Phone Max. USB drivers, Flash tool for Installing the firmware and a brief guide. To help you in installing the Energy Phone Max Stock Firmware.

Energy Phone Max Firmware is a set of programs and software installed on the ROM. it also is known as Energy Phone Max Flash File and Energy Phone Max Stock ROM. That firmware update is only for Energy Phone Max. Don’t try to install that firmware on other models of MTK Android devices that can destroy your phone.

Remember this guide is also very much needed in case of upgrade or downgrade the Energy Phone Max Firmware on Energy Phone Max. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Energy Phone Max. Some cases, We have bricked our Energy Phone Max, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime.

Also if you think your Energy Phone Max lag or has a problem, then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Energy Phone Max.

Energy Phone Max Firmware Flash File [Stock ROM]:

We will use Sp Flash Tool to unbrick the Energy Phone Max as we use for Qmobile Evok Power Lite. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Energy Phone Max.

The Advantages Energy Phone Max Firmware:

• Flash Stock To Unbrick your Energy Phone Max
• Fix boot loop issue
• Update and Downgrade Energy Phone Max
• Unroot or Fix Bugs
• To solve the lag or stutter on Energy Phone Max
• Fix software issues.
• Return to stock for warranty coverage.

Energy Phone Max Firmware Details:

• Gapps File: Included
• Device Supported: Energy Phone Max
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6582
• Os: Android

Download

• Energy_Phone_Max_MT6582_V03_150320.zip

Pre-requirements to Install Energy Phone Max Firmware:

• Supported Phone: Energy Phone Max
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• • Backup your Call Log – Contacts – Sms – Etc With G Backup
  • Backup your current Energy Phone Max Firmware With MTK Droid Tool
  • Backup your backup Energy Phone Max IMEI NVRAM

Energy Phone Max Flashing Tool And Drivers:

• Energy Phone Max Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Energy Phone Max VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

• Please Read and understand the Full Guide Before Flashing Energy Phone Max Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Energy Phone Max Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Energy Phone Max Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.