SM-A013M U1 Combination File

An A01 Core SM-A013M Binary 1 Combination File (U1)  is a test mode that does not have the effect of fixing the hardware, but only the test function of the operation or damage.

However, a Combination file can recover IMEI, Baseband, or some software errors but not all. By using a combination file, you will lose all features, including call, play games, web history, pictures. Etc.

A01 Core SM-A013M Combination File U1 A013MUBU1ATG1

There are various reasons to flash “Stock Firmware on A01 Core SM-A013M Binary 1“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

A01 Core SM-A013M U1 Stock ROM Details:

Model SM-A013M U1 Binary 1 Bit 1
Language Multi-Language
Android version 10 Q
PDA A013MUBU1ATG1
Date July / 2020
Revision 1
Size 871 MB
Download Google Drive  Android File Host

How To Install A01 Core SM-A013M Binary 1 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the A01 Core SM-A013M U1 Combination File on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your A01 Core SM-A013M Binary 1 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “A01 Core SM-A013M U1 Combination File.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.