If you own a Galaxy A04e SM-A042M/DS U2 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A04e SM-A042M/DS U2 With 2023-05-01 (May 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A04e SM-A042M/DS Binary 2 Android 13 Brazil ZTO A042MUBS2CWE1
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy A04e SM-A042M/DS U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy A04e SM-A042M/DS U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A04e SM-A042M/DS U2 Stock Firmware:
Download Galaxy A04e SM-A042M/DS U2 Latest Firmware:
SM-A042M/DS U2 Brazil ZTO A042MUBS2CWE1:
Model | SM-A042M/DS Binary 2 U2, S2, Bit 2 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | A042MUBS2CWE1 |
CSC | A042MOWO2CWD1 |
Modem CP Version / Baseband | A042MUBS2CWD1 |
product code | ZTO |
Model References | SM-A042MLBHZTO, SM-A042MZCHZTO, SM-A042MZKHZTO, SM-A042MZKPZTO |
Build Date | 2023-05-19 |
Security Patch Level | 2023-05-01 (May 1, 2023) |
Size | 4.5 GB |
Brazil ZTO | Google Drive |
Brazil Vivo ZVV | Mega Google Drive |
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A04e SM-A042M/DS U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A04e SM-A042M/DS U2 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A04e SM-A042M/DS U2 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy A04e SM-A042M/DS U2 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.