The specific Galaxy A11 SM-A115U1 Binary 6 Firmware Download Package comes with a Stock ROM of Galaxy A11 SM-A115U1 Binary 6 Security Patch Level 2022-02-01 (February 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A11 SM-A115U1 Binary 6 Android 11 R United States XAA A115U1UES6BVB1
There are various reasons to flash “Stock Firmware on Galaxy A11 SM-A115U1 Binary 6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A11 SM-A115U1 Binary 6
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A11 SM-A115U1 Binary 6 Stock ROM Details:
SM-A115U1 U6 United States XAA A115U1UES6BVB1:
Model | SM-A115U1 Binary 6 U6, S6, Bit 6 |
Region / Country | United States / USA |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean XAA (no logo or carrier apps) |
PDA | A115U1UES6BVB1 |
CSC | A115U1OYM6BVB1 |
MODEM CP Version | A115U1UES6BVB1 |
product code | XAA |
Build Date | 2022-02-09 |
Security Patch Level | 2022-02-01 (February 1, 2022) |
Size | 2.8 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy A11 SM-A115U1 Binary 6 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A11 SM-A115U1 Binary 6 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A11 SM-A115U1 Binary 6 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A11 SM-A115U1 Binary 6 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.