Download Samsung firmware for Galaxy S10+ device SM-G975F with region CAM nationality Cambodia. This firmware has version numbers PDA G975FXXSEGVA9 and CSC G975FOXMEGVA4. The operating system of this firmware is Android 12 S.
Samsung Firmware Samsung Galaxy S10+ SM-G975F CAM PDA G975FXXSEGVA9
There are various reasons to flash “Stock Firmware. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S10+ SM-G975F with region CAM Cambodia
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Firmware Details:
Galaxy S10 Plus SM-G975F CAM Cambodia Android 12 Firmware Updates:
Model | SM-G975F CAM Cambodia |
Name | Galaxy S10 Plus |
Region | CAM – Cambodia |
OS Version | Android 12 S |
PDA | G975FXXSEGVA9 |
CSC | G975FOXMEGVA4 |
MODEM | G975FXXUEGVA2 |
Size | 5.91 GB |
changelist | 23326020 |
build date | 2022-01-27 |
Security Patch Level | AT |
binary | AND |
Download | Google Drive |
Samsung Galaxy S10+ SM-G975F CAM PDA G975FXXUEGVA4 Firmware Download
Model | SM-G975F CAM Cambodia |
Name | Galaxy S10 Plus |
Region | CAM – Cambodia |
OS Version | Android 12 S |
PDA | G975FXXUEGVA4 |
CSC | G975FOXMEGVA4 |
MODEM | G975FXXUEGVA2 |
Size | 5.92 GB |
changelist | 23326020 |
build date | 2022-01-12 |
Security Patch Level | AT |
binary | AND |
Download | Google Drive |
Galaxy S10 Plus SM-G975F CAM Cambodia Android 11 Firmware Updates:
How To Install Samsung Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S10+ SM-G975F Firmware For Cambodia files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When you finally boot up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.Stock Firmware.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.