The specific Galaxy Note 4 SM-N910P Firmware N910PVPS4COK1 Download Package comes with a Stock ROM of Galaxy Note 4 SM-N910P. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Note 4 SM-N910P Firmware – N910PVPS4COK1
There are various reasons to flash “Stock Firmware on Galaxy Note 4 SM-N910P“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy Note 4 SM-N910P
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Note 4 SM-N910P Stock ROM Details:
SM-N910P Firmware – N910PVPS4COK1:
| PDA/AP Version | N910PVPS4COK1 |
| CSC Version | N910PSPT4COK1 |
| MODEM/CP Version | N910PVPS4COK1 |
| Region SPR | United States |
| Build Date | 2015-11-15 |
| Changelist | 5432499 |
| OS | 5.1.1 Lollipop |
| SM-N910P-SPR-N910PVPS4COK1.ZIP | Download |
How To Install Galaxy Note 4 SM-N910P Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Note 4 SM-N910P Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Note 4 SM-N910P finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Note 4 SM-N910P Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
