The specific Galaxy A10e SM-A102U U7 Firmware Download Package has a Stock ROM of Galaxy A10e SM-A102U U7 Security Patch Level 2020-08-01 (1 August 2020). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A10e SM-A102U Binary 7 Android 10 Q United States USA Verizon VZW – A102USQS7BTH3
There are various reasons to flash “Stock Firmware on Galaxy A10e SM-A102U U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy A10e SM-A102U U7
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A10e SM-A102U U7 Stock ROM Details:
Model | SM-A102U Binary 7 U7, S7, Bit 7 |
Region / Country | United States USA |
Language | Multi-Language |
Android version | Android 10 Q |
Operator | Verizon VZW |
PDA | A102USQS7BTH3 |
CSC | A102UOYN7BTH3 |
Product code | VZW |
Build Date | Fri, 07 Aug 2020 |
Security Patch Level | 2020-08-01 (1 August 2020) |
Size | 3.3 GB |
Download | Google Drive | Android File Host |
Download Galaxy A10e SM-A102U U7 Boot.img
boot.img Galaxy A10e SM-A102U A102USQS7BTH3 for root on Magisk
Download | Google Drive |
How To Install Galaxy A10e SM-A102U U7 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A10e SM-A102U U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A10e SM-A102U finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A10e SM-A102U U7 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.