Please disable any ad-blocker you are using in your browser.

Home / How To / How To Flash Greenberry GL-S100 MT6575 Stock Rom

How To Flash Greenberry GL-S100 MT6575 Stock Rom

Greenberry GL-S100 Official Stock Firmware Flash Files

 

Prerequisite To Flash Greenberry GL-S100 MT6575 :-

  1. Download SP Flash Tool Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice.
  2. Download Mediatek Usb Vcom Drivers
  3. Stock Rom Flash Files For Greenberry GL-S100 MT6575

 

Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.

 

Greenberry GL-S100 MT6575 Flashing With SP Flash Tool :-

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

 

Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :-

 

Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :-

It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :-

Now, you can switch on your device.

    Greenberry GL-S100 Official Stock Firmware flash files, Greenberry GL-S100 Hard Reset, Greenberry GL-S100 rom download, Greenberry GL-S100 SP Flash Tool, Greenberry GL-S100 Stock Rom Download

Leave a Reply

Your email address will not be published. Required fields are marked *

*