First of all download Official Stock Sintel V300 Star 9 Firmware. If you have Sintel V300 Star 9 Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are on the Correct Place, You have to do this by following the Below Guide.

This article contains the Sintel V300 Star 9 Firmware Flash File. That will allow you to recover your Sintel V300 Star 9 mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

Sintel V300 Star 9 Firmware Flash File [Stock Rom]

We will use Sp Flash Tool to unbrick the Sintel V300 Star 9. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Sintel V300 Star 9.

The Advantages Sintel V300 Star 9 Firmware:

• Flash Stock To Unbrick your Sintel V300 Star 9
• Fix boot loop issue
• Update and Downgrade Sintel V300 Star 9
• Unroot or Fix Bugs
• To solve the lag or stutter on Sintel V300 Star 9
• Fix software issues.
• Return to stock for warranty coverage.

Sintel V300 Star 9 Firmware Details:

• Gapps File: Included
• Device Supported: Sintel V300 Star 9
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6572
• Os: Android 4.4.2

Download

• Sintel_V300_Star_9_MT6572_20160321_4.4.2.zip

[quads id=2]

Pre-requirements to Install Sintel V300 Star 9 Firmware:

• Supported Phone: Sintel V300 Star 9
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• • Create of backup of your Call Log – Contacts – Sms – Etc With G Backup
  • Make Copy of your current Sintel V300 Star 9 Firmware With MTK Droid Tool
  • Backup Sintel V300 Star 9 IMEI NVRAM

Download Sintel V300 Star 9 Flashing Tool And Drivers:

• Sintel V300 Star 9 Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Sintel V300 Star 9 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

• Please read and understand the Full Guide Before Flashing Sintel V300 Star 9 Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Sintel V300 Star 9 Firmware:

1. Extract And Run SP flash tool.
2. Install MTK  android USB drivers.
3. Then download Sintel V300 Star 9 Firmware.
4. Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
5. Now open SP flash tool.exe.
6. When SP flash tool opens, go to the download button in the SP flash tool.
7. In the download tab, click on the scatter load button.
8. After locating the scatter tab, click on the download button.
9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
10. When flashing is completed, a green ring will appear in the SP flash tool.
11. Close the SP flash tool on your computer and unplug the phone.
12. Power on the phone and enjoy it.
13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.