ZT Mobile MI2 Firmware Flash File [ROM]

ZT Mobile MI2 Firmware is the software that is provided by the vendor or You may say that the software. which was installed by the manufacturer of the phone is ZT Mobile MI2 Stock Rom. the other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire.

Flashing a stock Firmware means installing the system image into the device’s internal flash memory. Flash memory holds Android’s firmware. the same as most other portable devices with an embedded OS.

This article contains the ZT Mobile MI2 Firmware Flash File. That will allow you to recover your ZT Mobile MI2 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

ZT Mobile MI2 Firmware Flash File [ROM]

We will use Sp Flash Tool to unbrick the ZT Mobile MI2. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your ZT Mobile MI2.

The Advantages ZT Mobile MI2 Firmware:

• Flash Stock To Unbrick your ZT Mobile MI2
• Fix boot loop issue
• Update and Downgrade ZT Mobile MI2
• Unroot or Fix Bugs
• To solve the lag or stutter on ZT Mobile MI2
• Fix software issues.
• Return to stock for warranty coverage.

ZT Mobile MI2 Firmware Details:

• Gapps File: Included
• Device Supported: ZT Mobile MI2
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6580
• Os: Android 6.0 Marshmallow

Download

• ZT_Mobile_MI2_MT6572_20140513.zip

[quads id=2]

Pre-requirements to Install ZT Mobile MI2 Firmware:

• Supported Phone: ZT Mobile MI2
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• • Create a copy of Call Log – Contacts – Sms – Etc With G Backup
  • Make a duplicate of current ZT Mobile MI2 Firmware With MTK Droid Tool
  • Backup your ZT Mobile MI2 IMEI NVRAM

Download ZT Mobile MI2 Flashing Tool And Drivers:

• ZT Mobile MI2 Flash Tool: Download the latest SP Flash tool and extract it (Install)
• ZT Mobile MI2 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

• Please read and understand the Full Guide Before Flashing ZT Mobile MI2 Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install ZT Mobile MI2 Firmware:

1. Extract And Run SP flash tool.
2. Install MTK  android USB drivers.
3. Then download ZT Mobile MI2 Firmware.
4. Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
5. Now open SP flash tool.exe.
6. When SP flash tool opens, go to the download button in the SP flash tool.
7. In the download tab, click on the scatter load button.
8. After locating the scatter tab, click on the download button.
9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
10. When flashing is completed, a green ring will appear in the SP flash tool.
11. Close the SP flash tool on your computer and unplug the phone.
12. Power on the phone and enjoy it.
13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.