itel S11XB Firmware Flash File [Stock ROM]

- Advertisement -

itel A13 SC7731 Android 6.0 Official Stock Firmware Flash Files 320x192 3


If you’re looking for the itel S11XB Firmware you need to flash, it can sometimes be difficult to locate online. For itel S11XB.

In this Article/Tutorial about Unbrick itel S11XB. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick itel S11XB Mediatek Based Devices.

- Advertisement -


This article contains the itel S11XB Firmware Flash File. That will allow you to recover your itel S11XB mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

itel S11XB Firmware Flash File [Stock ROM]:

We will use Sp Flash Tool to unbrick the itel S11XB as we use for BQ-Mobile STRIKE POWER MAX. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your itel S11XB.

[quads id=2]

The Advantages itel S11XB Firmware:

  • Flash Stock To Unbrick your itel S11XB
  • Fix boot loop issue
  • Update and Downgrade itel S11XB
  • Unroot or Fix Bugs
  • To solve the lag or stutter on itel S11XB
  • Fix software issues.
  • Return to stock for warranty coverage.

itel S11XB Firmware Details:

  • Gapps File: Included
  • Device Supported: itel S11XB
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android 8.1 Oreo


[quads id=2]

Pre-requirements to Install itel S11XB Firmware:

  • Supported Phone: itel S11XB
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

itel S11XB Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing itel S11XB Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install itel S11XB Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK android USB drivers.

Step 3: Then download itel S11XB Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction itel S11XB Firmware Flashing With Sp Flash Tool.

- Advertisement -