Samsung Galaxy S9 SM-G960F U15 Firmware Started rolling the latest 2021-04-01 (April 1 2021)2021-04-01 (April 1, 2021) security patch with build number G960FXXUFFUC6. The updated Android 10 Q latest patch device is best in Portugal. If you haven’t received the recent update version on your SM-G960F smartphone, you can manually check the software update setting.
Samsung Galaxy S9 SM-G960F Binary 15 Android 10 Q Portugal MEO – G960FXXUFFUC6
There are various reasons to flash “Stock Firmware on Galaxy S9 SM-G960F U15. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S9 SM-G960F U15
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S9 SM-G960F U15 Stock ROM Details:
Model | SM-G960F Binary 15 U15, S15, Bit 15 |
Region / Country | Portugal |
Language | Multi-Language |
Android version | Android 10 Q |
Operator / Carrier | Clean MEO (without logo, operator apps) |
PDA | G960FXXUFFUC6 |
CSC | G960FOXJFFUC6 |
Product code | MEO |
Build Date | Tue, 23 Mar 2021 |
Security Patch Level | 2021-04-01 (April 1, 2021) |
Size | 4.1 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy S9 SM-G960F U15 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.
2: Download and extract the Galaxy S9 SM-G960F U15 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S9 SM-G960F finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S9 SM-G960F U15 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.