The specific Galaxy S7 edge SM-G935A U10 Firmware Download Package has a Stock ROM of Galaxy S7 edge SM-G935A U10. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S7 edge SM-G935A Binary 10 Firmware Android 8.0.0 G935AUCSACSH3
There are various reasons to flash “Stock Firmware on Galaxy S7 edge SM-G935A U10“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S7 edge SM-G935A U10
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S7 edge SM-G935A U10 Stock ROM Details:
SM-G935A U10 Android 8.0.0 G935AUCSACSH3:
Model | SM-G935A Binary 10 U10, S10, Bit 10 |
Region / Country | United States |
Language | Multi-Language |
Android version | Android 8 Oreo |
Operator / Carrier | Clean (no logo, carrier apps) |
AP / PDA | G935AUCSACSH3 |
CSC | G935AATTACSH3 |
CP Version / Baseband Modem | – |
product code | ATT |
Build Date | – |
ADD DATE | 2022-05-24 |
Size | 3.07 GB Full Files |
Download | Google Drive | Mega |
Other Firmware For Galaxy S7 edge:
- Galaxy S7 Edge SM-G935T U11 Firmware
- Galaxy S7 edge SM-G935V U11 Firmware
- Galaxy S7 Edge SM-G935A U11 Firmware
How To Install Galaxy S7 edge SM-G935A U10 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S7 edge SM-G935A U10 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S7 edge SM-G935A U10 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S7 edge SM-G935A U10 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.