Galaxy S7 Edge SM-G935T U11 Firmware – G935TUVSBCTA2

Galaxy S7 Edge SM-G935T Binary 11 Firmware

The specific Galaxy S7 Edge SM-G935T U11 Firmware Download Package has a Stock ROM of Galaxy S7 Edge SM-G935T U11 Security Patch Level 2019-12-01. This helps bypass the FRP lock and revert from the root and custom ROM.

Galaxy S7 Edge SM-G935T Binary 11 Android 8.0.0 Oreo USA T-Mobile TMB – G935TUVSBCTA2

There are various reasons to flash “Stock Firmware on Galaxy S7 Edge SM-G935T U11“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S7 Edge SM-G935T U11 Stock ROM Details:

SM-G935T U11 USA T-Mobile TMB – G935TUVSBCTA2:

Model SM-G935T Binary 11 U11, S11, Bit 11
Region / Country United States the USA
Language Multi-Language
Android version Android  8.0.0 Oreo
Operator T-Mobile
PDA G935TUVSBCTA2
CSC G935TTMBBCTA2
Product code TMB
Build Date 16 Jan 2020
Security Patch Level 2019-12-01
Size 2.6 GB
[quads id=2]
Download Google Drive Android File Host

Download Galaxy S7 Edge SM-G935T U11 Boot.img

boot.img S7 edge SM-G935T G935TUVSBCTA2 for root on Magisk Download

How To Install Galaxy S7 Edge SM-G935T U11 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy S7 Edge SM-G935T U11 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S7 Edge SM-G935T finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S7 Edge SM-G935T U11 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.