The Galaxy M20 SM-M205M Binary 5 Firmware Download Package has a Stock ROM of Galaxy M20 SM-M205M U5 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
Galaxy M20 SM-M205M U5 Android 10 Q – M205MUBS5CTG2
There are various reasons to flash “Stock Firmware on Galaxy M20 SM-M205M U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy M20 SM-M205M U5
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy M20 SM-M205M U5 Stock ROM Details:
SM-M205M U5 Android 10 Q – M205MUBS5CTG2:
Model | SM-M205M Binary 5 U5, S5, Bit 5 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | 10 Q |
Operator | Clean ZTO (without logo, operator apps) |
PDA | M205MUBS5CTG2 |
CSC | M205MOWO5CTG2 |
Product code | ZTO |
Build Date | Sat, 25 Jul 2020 |
Security Patch Level | 2020-07-01 (1 July 2020) |
Size | 3 GB |
Download | 4File | Google Drive | Android File Host |
How To Install Galaxy M20 SM-M205M U5 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy M20 SM-M205M U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy M20 SM-M205M finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M20 SM-M205M U5 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.