The specific Galaxy A8 + 2018 SM-A730X Binary 1 Firmware Download Package comes with a Stock ROM of Galaxy A8 + 2018 SM-A730X U1. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Galaxy A8 + 2018 SM-A730X U1 Android 7.1.1. Nougat – A730XXXU1AQL1
There are various reasons to flash “Stock Firmware on Galaxy A8 + 2018 SM-A730X U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A8 + 2018 SM-A730X U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A8 + 2018 SM-A730X U1 Stock ROM Details:
Model | SM-A730X Binary 1 U1, S1, Bit 1 |
Region / Country | at |
Language | Multi-Language |
Android version | Android 7.0 Nougat |
Operator | Clean ZTO (without logo, operator apps) |
PDA | A730XXXU1AQL1 |
CSC | A730XPAP1AQL1 |
Product code | at |
Build Date | at |
Security Patch Level | at |
Size | 5.2 GB |
MediaFire (2 Parts, download both parts, put in the same folder, unzip the .zip)
Download | Part 1 | Part 2 |
How To Install Galaxy A8 + 2018 SM-A730X U1 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A8 + 2018 SM-A730X U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A8 + 2018 SM-A730X finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A8 + 2018 SM-A730X U1 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.