Galaxy Tab 8.0 Wifi SM-T290 Binary 3 Firmware [Full Repair]

Galaxy Tab 8.0 Wifi SM-T290

The specific Galaxy Tab 8.0 Wifi SM-T290 Binary 3 Firmware Download Package comes with a Stock ROM of Samsung Galaxy Tab 8.0 Wifi SM-T290 U3 Security Patch Level 2021-11-01 (November 1, 2021). This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy Tab 8.0 Wifi SM-T290 Binary 3 Firmware 4 Files

There are various reasons to flash “Stock Firmware on Galaxy Tab 8.0 Wifi SM-T290 U3“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy Tab 8.0 Wifi SM-T290 U3 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy Tab 8.0 Wifi SM-T290 U3 Stock ROM Details:

Gapps:Included
Device Supported:Samsung Galaxy Tab 8.0 Wifi SM-T290 Binary 3, U3, Bit 3
Tool Supported:Odin
OS Ver:Android 9.0, Android 10
T290XXU 3 BTG1_T290ODM3BTG2_INS_10.0.zipAFHOneDrive GDrive2
T290XXS 3 ATE2_T290OLM3ATE2_XEV_9.0.zipAFHOneDriveGDrive2

Galaxy Tab A 8.0 SM-T290 Binary 3 Android 10 Q Brazil ZTO – T290XXS3BTK1

ModelSM-T290 Binary 3 U3, S3, Bit 3
CountryBrazil
LanguageMulti-Language
AndroidAndroid 10 Q
OperatorLimpa ZTO (sem logo, apps de operadora)
PDAT290XXS3BTK1
CSCT290OWO3BTJ2
Product codeZTO
Build Date30 Nov 2020
Security Patch Level2020-11-01 (1 Novembro 2020)
Size2.7 GB
DownloadGoogle DriveAndroid File Host

Galaxy Tab A 8.0 SM-T290 Binary 3 Android 9 Pie Argentina ARO – T290XXS3ATC1

ModelSM-T290 Binary 3 U3, S3, Bit 3
Region / CountryArgentina
LanguageMulti-Language
Android versionAndroid 9 Pie
Operator / CarrierClean ARO (without logo, operator apps)
PDAT290XXS3ATC1
CSCT290OWO3ATC1
Product codeARO
Build DateTue, 03 Mar 2020
Security Patch Level2020-03-01 (March 1, 2020)
Size2.5 GB
DownloadGoogle DriveAndroid File Host

Galaxy Tab A 8.0 SM-T290 Binary 3 Android 11 R Brazil ZTO – T290XXU3CUF8

ModelSM-T290 Binary 3 U3, S3, Bit 3
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierClean ZTO (no logo, carrier apps)
PDAT290XXU3CUF8
CSCT290OWO3CUF8
product codeZTO
Build Date2021-06-26
Security Patch Level2021-05-01 (May 1, 2021)
Size3.5 GB
DownloadGoogle DriveAndroid File Host

Galaxy Tab A 8.0 SM-T290 Binary 3 Android 11 R Brazil ZTO T290XXU3CUK4

ModelSM-T290 Binary 3, U3, S3, Bit 3
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierClean ZTO (no logo, carrier apps)
PDAT290XXU3CUK4
CSCT290OWO3CUK2
MODEM CP VersionT290XXU3CUK4
product codeZTO
Build Date2021-11-25
Security Patch Level2021-11-01 (November 1, 2021)
Size3.5 GB
DownloadGoogle DriveAndroid File Host

Download Galaxy Tab 8.0 Wifi SM-T290 U3 Boot.img

boot.img Tab A 8.0 SM-T290 T290XXS3BTK1 para root no Magisk sem TWRP

boot.img_T290XXS3BTK1_T290OWO3BTJ2_ZTO.zipGoogle Drive

How To Install Galaxy Tab 8.0 Wifi SM-T290 U3 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy Tab 8.0 Wifi SM-T290 U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy Tab 8.0 Wifi SM-T290 U3 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy Tab 8.0 Wifi SM-T290 U3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.