The specific Galaxy A50 SM-A505G U5 Firmware Download Package has a Stock ROM of Galaxy A50 SM-A505G U5 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy A50 SM-A505G U5 – A505GUBS5BTG1

There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505G U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs
• To solve the lag or stutter
• Fix software issues.
• Revert to stock firmware

Pre-requirements:

• Supported Phone: Galaxy A50 SM-A505G U5
• Ensure it’s at least 50% charged.
• Laptop or PC.
• Backup Android Phone
• Download and install the Samsung USB Driver
• Download Odin’s Latest version

Galaxy A50 SM-A505G U5 Stock ROM Details:

Model:	SM-A505G Binary 5 U5, S5, Bit 5
Region / Country:	Peru
Language:	Multi-Language
Android version:	Android 10 Q
Operator:	Clean PET (without logo, operator apps)
PDA:	A505GUBS5BTG1
CSC:	A505GOWA5BTC4
Product code:	PET
Build Date:	07 Jul 2020
Security Patch Level:	2020-07-01 (1 July 2020)
Size:	4 GB

[quads id=2]

Download

4File

Google Drive

Android File Host

How To Install Galaxy A50 SM-A505G U5 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy A50 SM-A505G U5 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A50 SM-A505G U5 finally boots up, you should now run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

• Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505G U5 Firmware“.
• Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
• Phone must have a 70–80% charge.