Blu Studio J1 S051Q Firmware Flash File [MT6570 ROM]

If you own Blu Studio J1 S051Q and looking for Blu Studio J1 S051Q firmware. ADB Driver, and Fastboot Driver suitable for your device. then this is the right place to download Blu Studio J1 S051Q ADB Driver, Android USB Driver, and Fastboot Drivers. Sometimes users brick their devices when rooting.

And the only way to fix that is by flashing back the Blu Studio J1 S051Q stock firmware. Blu Studio J1 S051Q Stock Firmware is an application and operating system that control. How Blu Studio J1 S051Q operates, and it flashed into Blu Studio J1 S051Q phone’s ROM.

Android 6.0 is the operating system of the BLU Studio J1, which in terms of dimensions has a profile of 10.3 mm and a weight of 135 g.

Among the features of the BLU Studio J1 is a 4 “screen with a resolution of 480 x 800 pixels. In the Studio J1 of BLUWe found a MediaTek MT6570 1.3GHz processor, accompanied by 512MB of RAM. In addition, it has 8GB of storage and internal memory can be extended via microSD. The rear camera is 5 MP resolution with video capture, and the power is provided by a 1350 mAh battery. The Studio J1 also has FM Radio.

Blu Studio J1 S051Q Firmware Flash File [MT6570 ROM]:

If your Blu Studio J1 S051Q device is corrupt or bricked. Download Blu Studio J1 S051Q firmware from here. (based on your device model number) and flash it on your smartphone or tablet.

To get it back to a working condition again. In this post, we share Blu Studio J1 S051Q official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Blu Studio J1 S051Q and flash with any chines Mobiles flashing tool or box.

We will use Sp Flash Tool to unbrick the Blu Studio J1 S051Q as we use for BLU Studio G2 HD S550Q. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Blu Studio J1 S051Q.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of Blu Studio J1 S051Q Firmware:

• Flash Stock To Unbrick your Blu Studio J1 S051Q
• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs
• To solve the lag or stutter
• Fix software issues.
• Return to stock for warranty coverage.

Blu Studio J1 S051Q Firmware Details:

• Gapps File: Included
• Device Supported: Blu Studio J1 S051Q
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6570
• Os: Android

[quads id=2]

Pre-requirements to Install Blu Studio J1 S051Q Firmware:

• Supported Phone: Blu Studio J1 S051Q
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• • Backup your Call Log – Contacts – Sms – Etc With G Backup
  • Backup your current Firmware With MTK Droid Tool
  • Backup your backup IMEI NVRAM

Flashing Tool And Drivers:

• Blu Studio J1 S051Q Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Blu Studio J1 S051Q VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

• Please read and understand the Full Guide Before Flashing Blu Studio J1 S051Q Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Blu Studio J1 S051Q Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Blu Studio J1 S051Q Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.