Tab S2 SM-T719Y U2 Combination File – T719YDXU2AQA1
A Tab S2 SM-T719Y U2 Combination File is a test mode that does not have the effect of fixing the hardware but only the test function of the operation or damage.
However, a Combination file can recover IMEI, Baseband, or some software errors, but not all. Using a combination file will lose all features, including calls, play games, web history, and pictures. Etc.
Tab S2 SM-T719Y Combination File Android 6.0 Marshmallow Binary 2 T719YDXU2AQA1
There are various reasons to flash “Stock Firmware on Tab S2 SM-T719Y U2. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Tab S2 SM-T719Y U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Tab S2 SM-T719Y U2 Stock ROM Details:
Model | SM-T719Y |
Language | Multi-Language |
Android version | Android 6 Marshmallow |
PDA | T719YDXU2AQA1 |
Date | January / 2017 |
Revision | 1 |
Size | 633 MB |
Combination File Tab S2 SM-T719Y U2 Binary 2 Bit 2
COMBINATION_OXA_FA60_T719YDXU2AQA1_OXA2AQA1_CL7958170_QB12140569_REV00
Download | Google Drive | Android File Host |
How To Install Tab S2 SM-T719Y U2 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Tab S2 SM-T719Y U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Tab S2 SM-T719Y U2 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Tab S2 SM-T719Y U2 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.