Tambo TA-2 Firmware File [Stock ROM Flash/Unbrick]

If you’re looking for the Tambo TA-2 Firmware you need to flash, it can sometimes be difficult to locate online. For Tambo TA-2. In this Article/Tutorial about Unbrick Tambo TA-2. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Tambo TA-2 Mediatek Based Devices.

he Tambo TA 2 mobile features a 5.0″ (12.7 cm) display with a screen resolution of 480 x 854 pixels and runs on Android v7.0 (Nougat) operating system.

The device is powered by Quad-core, 1.3 GHz, Cortex A7 processor paired with 1 GB of RAM. As far as the battery is concerned it has 2500 mAh. Over that, as far as the rear camera is concerned this mobile has a 5 MP camera.

Other sensors include Accelerometer. So, does it have a fingerprint sensor? No, it doesn’t. For graphical performance that can make games run smoothly, this phone has got a Mali-400 MP2 GPU. Onboard storage is at 8 GB with the option to expand the memory by Yes Up to 64 GB.

The design is one of the most important factors when it comes to mobiles. This phone is 9.5 mm slim and weighs 150.7 grams.

Tambo TA-2 Firmware

This article contains the Tambo TA-2 Firmware Flash File. That will allow you to recover your Tambo TA-2 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the Tambo TA-2. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Tambo TA-2.

The Advantages Of Tambo TA-2 Firmware:

  • Flash Stock To Unbrick your Tambo TA-2
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Tambo TA-2
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Tambo TA-2
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Tambo TA-2 Of Firmware Details:

  • Gapps File: Included
  • Device Supported: Tambo TA-2
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek
  • Os: Android

Download

Tambo_TA-2_V14_Indian.rar

Pre-requirements to Install Tambo TA-2 Firmware:

  • Supported Phone: Tambo TA-2
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Download Tambo TA-2 Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Tambo TA-2 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Tambo TA-2 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Tambo TA-2 Firmware:

1. Download Tambo TA-2 stock ROM zip file given above and extract it in your computer.

2. Download Tambo TA-2 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Tambo TA-2 smartphone and take away the battery (it’s removable).

Switch Off Tambo TA-2

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For Tambo TA-2 Firmware Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

Tambo TA-2 Firmware File [Stock ROM Flash/Unbrick] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Tambo TA-2 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Tambo TA-2 Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Tambo TA-2 Firmware

9. Next, join your Tambo TA-2 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Tambo TA-2 Firmware Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Tambo TA-2 Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Tambo TA-2 Firmware Flashing With Sp Flash Tool.

Search Tags:

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close