Philips S388 Firmware File

Download Official Stock Firmware Flash File For Philips S388. If you have Philips S388 Smartphone. and You want to download the Stock ROM – Flash File For it. then You are in a right place, You have to do this by using the Below Tutorial.

Philips S388 Firmware File

This article contains the Philips S388 Firmware Flash File. That will allow you to recover your Philips S388 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

How To Flash Philips S388 Firmware File [ROM]

We will use Sp Flash Tool to unbrick the Philips S388 as we use for ZTE A880 FIRMWARE. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Philips S388.

The Advantages Philips S388 Firmware:

  • Flash Stock To Unbrick your Philips S388
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Philips S388
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Philips S388
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.
You May Also Like  How To Flash Lava R3 Firmware File [ROM]

Philips S388 Firmware Details:

  • Gapps File: Included
  • Device Supported: Philips S388
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek M6582K


Pre-requirements to Install Philips S388 Firmware:

  • Supported Phone: Philips S388
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Philips S388 Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Philips S388 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Philips S388 Firmware:

Step 1: Extract And Run SP flash tool.

You May Also Like  How To Flash Lava R3 Firmware File [ROM]

Step 2: Install MTK  android USB drivers.

Step 3: Then download Philips S388 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Karbonn Yuva 2 Firmware

Follow Detailed Instruction Philips S388 Firmware Flashing With Sp Flash Tool.

Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.