This time I will share a tutorial on how to flash PEACE PR360 Firmware uses Flash Files. With computers in an easy and tested way on our devices. In this article, you will find PEACE PR360 Stock Firmware ROM.
official download link flashing tutorial and flash tool. Download PEACE PR360 stock ROM from here. Flash it in your device and enjoy the native Android experience again.
Download PEACE PR360 Firmware. If you have PEACE PR360 Smartphone. And you want to download the Stock ROM – Flash File For it. Then you are in a Correct Place, You have to do this by following the Below Guide.
If your PEACE PR360 device is corrupt or bricked. Download PEACE PR360 firmware from here. (based on your device model number) and flash it on your smartphone or tablet.
To get it back to a working condition again. In this post, we share PEACE PR360 official flash file we test this ROM on many phones it,s work well.
To download the official firmware of PEACE PR360 and flash with any chines Mobiles flashing tool or box.
The Benefit Of PEACE PR360 Stock ROM:
- Flash Stock To Unbrick
- Flash Stock ROM to solve the boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs on the phone
- To solve the lag or stutter
- By flashing Stock ROM, you can fix software issues.
- Revert back to stock to get your warranty.
PEACE PR360 Stock ROM Details:
- Gapps File: Included
- Device Supported: PEACE PR360
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6580 – MT6572
- Os: Android 5.1 Lollipop
Download Peace pr360 Flash File Without Password
Normal Flash File:
Peace pr360 Camera Fix:
Pre-requirements to Install PEACE PR360 Stock Firmware:
- Supported Phone: PEACE PR360
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
Take Peace pr360 Backup:
Peace pr360 Flashing Tool And Drivers:
We will use Sp Flash Tool to unbrick the PEACE PR360 as we use for Bitel M50. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your PEACE PR360.
SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device.
This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.
- PEACE PR360 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- PEACE PR360 USB driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
- Please read and understand the Full Guide Before Flashing PEACE PR360 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install PEACE PR360 Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download PEACE PR360 Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When SP flash tool open, go to download button in SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in SP flash tool.
Step 11: Close SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction PEACE PR360 Firmware Flashing With Sp Flash Tool.
Added: Peace pr360 Flash File Without Password
Added: Peace pr360 Camera Fix Firmware(Flash File)
Added: Peace PR360 MT6572 V1.5 Dead Boot Fix Firmware