How To Flash Panasonic Eluga A3 Firmware [Stock ROM]

The Panasonic Eluga A3 is powered by 1.25GHz octa-core processor and it comes with 3GB of RAM. The phone packs 16GB of internal storage that can be expanded up to 16GB via a microSD card. As far as the cameras are concerned, the Panasonic Eluga A3 packs a 13-megapixel primary camera on the rear and an 8-megapixel front shooter for selfies.

The Panasonic Eluga A3 is powered by a 4000mAh nonremovable battery. It measures 148.70 x 72.40 x 9.10 (height x width x thickness) and weighs 161.00 grams.

The Panasonic Eluga A3 is a dual SIM (GSM + CDMA and GSM) smartphone. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include a Proximity sensor, Accelerometer, and Ambient light sensor.

How To Flash Panasonic Eluga A3 Firmware [Stock ROM]

Today I am going to show you on How to Install Stock ROM on Panasonic Eluga A3. Here’s the list of Stock ROM for Panasonic Eluga A3. You can now Install the Stock Firmware for Panasonic Eluga A3 using the SP Flash Tool. Download the ROM that we have listed in this article below. Additionally, you can update your Panasonic Eluga A3 mobile phone anytime, you can also install the Stock Firmware build to go back to the older version also. In the case for those who have bricked your device, then you can restore the phone (Unbrick) using the stock firmware anytime. Additionally, if you think your Panasonic Eluga A3 lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware does not void a warranty on your Panasonic Eluga A3. Panasonic Eluga A3 runs on Android 7.0 Nougat out of the box. Here is the latest Android 7.0 Nougat firmware Update but once we see the new update or incremental update we will keep the post updated. To install the Stock Firmware on Panasonic Eluga A3, Please follow the guide and download the ROM and SpFlashtool on your computer. This guide is for How to Install Stock ROM on the Panasonic Eluga A3 smartphone.

How to Flash Firmware on Panasonic Eluga A3:

We will use Sp Flash Tool to unbrick the Panasonic Eluga A3. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Panasonic Eluga A3.

The Benefit Panasonic Eluga A3 Of Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Panasonic Eluga A3 is stuck in a boot loop, and as the name implies, is caused by a software error on Panasonic Eluga A3, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on Panasonic Eluga A3 through recovery or with SP Flash Tool. If your Panasonic Eluga A3 device turns to a soft-brick, it may:

  • Panasonic Eluga A3 Keeps Rebooting.
  • Panasonic Eluga A3 Boots Straight Into Recovery.
  • Panasonic Eluga A3 Boots Straight Into its Bootloader.
  • Panasonic Eluga A3 Freeze at the startup screen or boot Animation,

Firmware Details:

  • Gapps File: Included
  • Device Supported: Panasonic Eluga A3
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6737M
  • Os: Android 7.0 Nougat
Download File Description
Download

Download

Panasonic_A3_MT6737M_EB-90S52EA3v1009_06072017.zip

Panasonic_A3_MT6737M_EB-90S52EA3v1021_08082017.zip

 

Pre-requirements to Install Stock Firmware on Panasonic Eluga A3:

  • Supported Phone: Panasonic Eluga A3
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Backup your Call Log – Contacts – Sms – Etc With G Backup

Backup your current Firmware With MTK Droid Tool

MTK Droid Tool is a small tool that allows you to perform various tasks, including rooting your Panasonic Eluga A3, creating scatter file for your MediaTek device, taking the backup of the stock firmware on your Panasonic Eluga A3 and lots more. It allows you to root your android device in a click only. Simply, enable USB debugging on your device > connect your device > click on the root in MTK droid tool. backup the stock recovery on your Android device, as well as restoring the recovery on your Panasonic Eluga A3. Backup Stock Firmware: It allows you to back up the stock firmware on your MTK (MediaTek) device. It allows you to create blocks (scatter file), that helps you to flash stock firmware on any MediaTek device. backup and restore IMEI on any MediaTek device. Besides supporting the Mediatek device, it also supports various other chipsets.

Follow Detail instruction to Backup Panasonic Eluga A3 current Firmware With MTK Droid Tool

Backup your backup IMEI NVRAM

in some cases, when we using this process you may be lost IMEI number on Panasonic Eluga A3 and get NV RAM error in your Smartphone. In this case, we should know, How to resolve NVRAM error? So here is the solution of this NVRAM error NVRAM WARNING err 0x10 and NVRAM WARNING err = 0x02. As well as you should fix lost IMEI number issue. We are trying to make it easy, firstly we need a rooted phone if your phone is not rooted then find your root guide and root your Panasonic Eluga A3 device.

Follow Detail instruction to Backup Panasonic Eluga A3 backup IMEI NVRAM

Flashing Tool And Drivers:

Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very user-friendly tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)

ADB and Fastboot are the basic utilities if you wish to ROOT, Unlock bootloader or install a custom Recovery like TWRP on Panasonic Eluga A3. Therefore, if you are a developer or perhaps you would like to learn ways to get most out of your Panasonic Eluga A3 as a Developer or a professional user then you definitely should require ADB and Fastboot the standard building blocks for your Panasonic Eluga A3.

in this article, I have introduced the Panasonic Eluga A3 One Click ADB and Fasboot Downloads for Windows that is primarily developed by Snoop05. I must say this a really simple-to-use application and it is such as plug-n-play installation. As a user, you do not need to worry and setup anything manually as this utility is going to be doing everything for you with only one Click.

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Panasonic Eluga A3 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Panasonic Eluga A3:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Stock Firmware Flash File ROM for your phone from below.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close