The specific MyPhone MYXI1 Firmware comes with a Stock ROM of MyPhone MYXI1. This helps you to bypass FRP lock and revert from the root and custom ROM.
How To Flash MyPhone MYXI1 Stock ROM:
There are various reasons to flash (Firmware on MyPhone MYXI1).
For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.
Requirements To Flash MyPhone MYXI1 Stock ROM:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- 1. Take MyPhone MYXI1 Full Backup
Before going to install MyPhone MYXI1 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
- 2. Download MyPhone MYXI1 Flash Tool And Drivers:
- A. Download and install MyPhone MYXI1 Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
- B. We use the Spreadtrum flash tool for as MyPhone MYXI1 Flash Tool because of this tool is very efficient and support all kind of SPD phones.
Instructions to Flash MyPhone MYXI1 Stock ROM:
1: Download and install SPreadtrum USB Driver on your computer.
2: Download the MyPhone_MYXI1_SP7731E_V1.17_20190330_8.1.0 flash file.
3: Extract Spreadtrum Upgrade Tool on your computer.
4: Now open Spreadtrum Upgrade Tool .exe.
5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).
6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the MyPhone MYXI1 ROM file. (having .pac extension)
7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
8: Wait for 2 – 10 minutes, as the device is in the flashing process.
9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.
10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.
- Congratulations, You have successfully installed MyPhone MYXI1 Stock ROM using SPD Flash tool.
Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.
Bin Packet load Error When Flashing “MyPhone MYXI1 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
How to Write IMEI After Flashing MyPhone MYXI1 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.
MyPhone MYXI1 Firmware Details:
|Gapps: Included||No Root|
|Device Supported: MyPhone MYXI1||No Twrp And Nand Backup|
|Tool Supported: SPD Flash Tool||No Customization And Over cloaking|
|Soc: Spreadtrum||No ADB Ad Block|
|Os: Android 8.1||Pre-installed OEM apps|