J5 Pro SM-J530YM Firmware – Full Repair
The specific J5 Pro SM-J530YM Firmware Download Package comes with a Stock ROM of J5 Pro SM-J530YM. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy J5 Pro SM-J530YM Firmware
There are various reasons to flash “Stock Firmware on J5 Pro SM-J530YM“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: J5 Pro SM-J530YM
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
J5 Pro SM-J530YM Stock ROM Details:
ROM FULL J530YM DOWNLOAD |
||||||
AP VERSION | CSC VERSION | code | Type | OS | Size | google link |
J530YMDXU 5 CSH8 | J530YMOLD5CSH8 | THL | FULL | 9 | 2.2G | DOWNLOAD |
J530YMDXS 5 BSG1 | J530YMOLD5BSG1 | THL | FULL | 8.1 | 2.1G | DOWNLOAD |
J530YMDXU 4 BSD1 | J530YMOLD4BSD1 | THL | FULL | 8.1 | 2.1G | DOWNLOAD |
J530YMDXS 4 BRL1 | J530YMOLD4BRJ1 | THL | FULL | 8.1 | 2.1G | DOWNLOAD |
J530YMDXU 3 BRH6 | J530YMOLD3BRH3 | THL | FULL | 8.1 | 2.0G | DOWNLOAD |
J530YMDXU 3 ARG2 | J530YMOLD3ARG2 | THL | FULL | 7.0 | 1.7G | DOWNLOAD |
J530YMDXU 2 AQI4 | J530YMOLD2AQI4 | THL | FULL | 7.0 | 1.7G | DOWNLOAD |
J530YMDXU 1 AQF1 | J530YMOLD1AQG1 | THL | FULL | 7.0 | 1.4G | DOWNLOAD |
How To Install J5 Pro SM-J530YM Stock Firmware:
How To Flash Samsung Stock Firmware With ODIN
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.
2: Download and extract the J5 Pro SM-J530YM Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
You should run your desired firmware when your J5 Pro SM-J530YM finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”J5 Pro SM-J530YM Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.