Samsung M20 SM-M205F U1 Firmware – Full Repair
The specific Samsung M20 SM-M205F U1 Firmware Download Package comes with a Stock ROM of Samsung M20 SM-M205F. This helps you to bypass FRP lock and revert from the root and custom ROM.
Samsung Samsung M20 SM-M205F U1 Firmware
There are various reasons to flash “Stock Firmware on Samsung M20 SM-M205F U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Samsung M20 SM-M205F U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Samsung M20 SM-M205F U1 Stock ROM Details:
M205FDDU 1 BSF4 | M205FODM1BSF4 | NPB | FULL | OS9 | 2.6G | DOWNLOAD |
M205FDDU 1 BSEB | M205FODM1BSEB | INS | FULL | OS9 | 2.6G | DOWNLOAD |
M205FDDU 1 ASC1 | M205FODM1ASC1 | SLI | FULL | 8.1 | 2.5G | DOWNLOAD |
M205FDDU 1 ASB1 | M205FOJM1ASAD | MID | FULL | 8.1 | 2.4G | DOWNLOAD |
M205FDDU 1 ASA4 | M205FODM1ASA4 | INS | FULL | 8.1 | 2.4G | DOWNLOAD |
How To Install Samsung M20 SM-M205F U1 Stock Firmware:
How To Flash Samsung Stock Firmware With ODIN
1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Samsung M20 SM-M205F U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Samsung M20 SM-M205F finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Samsung M20 SM-M205F U1 Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.