How to use PhoenixSuit to Flash Stock Firmware
These instructions explain how to flash or install.img firmware (ROM) on devices running the Allwinner Chipset using the PhoenixSuit Tool.
Install .img Firmware (ROM) using the PhoenixSuit
You need to get Phoenix Suit onto your computer. PhoenixSuit requires the use of Android USB drivers, which will be prompted during setup (Simply Click on install anyway to continue).
Get Your Device’s Original (Stock) Firmware (.img File) Here (if in case you have already downloaded the Stock Firmware, then SKIP this Step, or else you can find the .img based Stock Firmware on FirmwareFile or through Google).
Launch/Open PhoenixSuit Application from the Start Menu or Directly from C:\Program Files (x86)\AllWinnertech\PhoenixSuit.
PhoenixSuit’s Firmware Menu can be accessed from the application’s main menu.
Select the (.img) firmware file you downloaded in Step 2 from your computer by clicking the Image Button in the Firmware menu.
Power off your Android Device.
While holding down the volume up or down button, plug your Android device into your computer via the USB cable.
Now, without letting go of any of the keys, press the power button 5–10 times to get your device recognized by the Phoenix Suit.
When Phoenix Suit recognizes a device, it will prompt you to enter its mandatory Format. Just select “Yes” to continue.
The installation/flashing procedure will be initiated by Phoenix Suit.
Once the Flashing/Installation process is completed, you will be able to see Upgrade Firmware Succeed Message on the computer Screen. Click on OK to end the Flashing.
As soon as you have finished using PhoenixSuit, disconnect your Android device from the computer.
Congratulations, the stock firmware you downloaded for your Android device is now successfully running on it.
